Removing the Wheel

1. Loosen wheel bolts before lifting the harvester off the ground.

2. Raise the axle housing using a 20 ton capacity service jack.

3. Put a floor stand under the axle compartment.

4. Put wheel lift under the wheel. Fasten a safety chain around the upper portion of the tire.

5. Remove three evenly spaced bolts and install threaded dowels in their place. Remove the remaining bolts and pull the wheel assembly away from the unit.

causym CAUTION: The explosive separation of a tire and rim parts can cause serious injury or death.

AG,T803584,183 -19-07JUN00-1/1