Greasing Front Wheel Hub Bearings

1. Remove the hub cap (A) on the front wheel hub assembly.

2. Inspect the bearing for adequate grease. If the grease has harden or is extremely dirty remove it from the hub.

CQ282602

GB52027,0000946 -19-19MAY09-1/2

3. To add grease to the front hub assembly proceed as follows:

a. Elevate the front wheel off the ground.

IMPORTANT: While the wheel is elevated, check it for excessive free play, if the assembly has excessive free play consult Repair Tech manual to see the appropriate repair procedure.

b. Begin pump grease into the grease fitting (B) on the hub assembly, at the same time rotate the wheel. Continue this procedure until fresh grease discharges from all locations on the bearing.

c. Pack the hub cap (A) with fresh grease and reinstall it on the hub assembly.

CQ282603

GB52027,0000946 -19-19MAY09-2/2