|
After the mower has been completely assembled, inspect it to be sure it is good running order before delivering it to the customer. Check of each item when found satisfactory or after making the necessary adjustments.
-
Mower has been assembled properly.
-
All grease fittings have been lubricated and gear case filled.
-
Lubricate all lubrication points, be sure all fittings are taking grease and check all lubrication seals for leakage.
-
Check gear case for external oil leaks.
-
Check drive belt tension and adjust, it necessary.
-
Check tightness of drive pulley screw.
Date Set Up_____________________________
|
-
Check tightness of all external nuts and bolts. Pay particular attention to those securing the knives.
-
Check that all moving parts are working freely.
-
Connect PTO and check operation of PTO gear case and rotor. Watch for any signs of faulty operation, vibration or unusual sounds. After a period of operation, disengage PTO and shut off tractor engine. Check for loose bolts, heated bearings and gear case.
-
Mower has been run for 30 minutes and bearings are not overheating.
-
Clean the mower and touch up any places where the paint is nicked or scratched. Be sure all decals are properly affixed and undamaged.
Signature of Set-Up Technician________________
|