|
Uneven cut
|
Travel speed too fast.
|
Reduce travel speed.
|
|
|
Knives worn, dull or broken.
|
Replace knives. (See REPLACING KNIVES in Service section).
|
|
|
Mower not leveled side-to-side.
|
Adjust tractor lift links.
|
|
|
Improper height adjustment.
|
Adjust tractor center link. (See ADJUSTING CUTTING HEIGHT in Operation section).
|
|
|
Low tractor tire pressure on one side.
|
Adjust tire pressure (See your tractor Operator's manual).
|
|
|
Tractor tires press grass down.
|
Adjust tractor wheel spacing. (See your tractor Operator's manual).
|
|
|
Grass too wet.
|
Wait for grass to dry.
|
|
Poor shredding
|
Excessive ground speed.
|
Reduce ground speed.
|
|
|
Rotor speed too low.
|
Operate PTO at 540 rpm at engine rated speed.
|
|
|
Incorrect cutting height setting.
|
Adjust cutting height. (See SETTING CUTTING HEIGHT in Preparing the Mower section).
|