|
After final assembly, adjustment, lubrication, and before machine
use; conduct inspections.
|
Review manual and machine for safety signs.
|
|
|
Review manual for proper operation, adjustment, and service.
|
|
|
Review manual for regular lubrication points and intervals.
|
|
|
Review manual for lighting and devices available when transporting
machine.
|
|
|
Review manual for attachment / connection process to tractor
and control devices (hitch, hydraulic, and electrical).
|
|
|
Review additional documentation (instructions, warranty, serial
numbers).
|
|
|
Machine is assembled according to instructions (nuts and bolts
tightened properly).
|
|
|
Equipment is lubricated, rotates or moves freely (without dragging
or interference).
|
|
|
Transport link is adjusted to reach lug when cylinder fully
extended.
|
|
|
Paint all unpainted bolts and nuts or any parts scratched in
shipment.
|
|
|
Properly connect machine to tractor drawbar.
|
|
|
Axle lift fittings are installed and lubricated.
|
|
|
All grease fittings are installed.
|
|
|
During first season of operation; inspect proper operating conditions.
|
Check entire machine for loose or missing hardware (replace
or re-torque as necessary).
|
|
|
Check entire machine for broken, damaged, or missing parts (repair
as necessary).
|
|
|
If possible; operate machine to check for proper functionality.
|
|
|
Review manual for proper safety, operation, lubrication, and
service of machine.
|
|
|
Contact John Dealer for assistance (checks, inspections, operation,
lubrication, service, or additional equipment).
|
|
|
Daily inspect machine lubrication and operation.
|
Lubricate machine according to service intervals.
|
|
|
Check for loose or missing hardware or damaged parts.
|
|
|
Check machine connections to tractor (hitch, hydraulic, and
electrical).
|
|
|
Check machine and tractor operating controls.
|
|