Positioning Tractor Drawbar

RW5905-UN-07OCT88

CAUTION: To avoid personal injury, use locking pins to hold drawbar stationary when operating PTO driven implements.

IMPORTANT: Failure to reposition drawbar can result in serious powerline damage.

IMPORTANT: To prevent damage to the driveline, remove, shorten, or place drawbar to one side. If equipped with clevis, remove it.

1. Slide drawbar toward front of tractor as far as possible

2. Remove locking pins and move drawbar to either side of hitch support. Keep it away from center position.

3. Install locking pins.

4. Remove drawbar, if necessary.

Refer to your tractor Operator's Manual.