Adjust Bucket Level Indicator

W09840
W09840-UN-08SEP08

A - Cap Screw

B - Level Indicator Rod

C - Guide Rod

D - Bucket

The bucket top is parallel to the bottom. The bucket is level when the bucket top is level.

  1. Position the bucket (D) level on the ground.

  2. Loosen the cap screw (A). Adjust the indicator rod (B) in the tube until the bend in the rod rests in the bottom of the guide rod (C). Tighten the cap screw (A).

The indicator position for a bucket is not the same as for an attachment.

When using the level indicator for an attachment other than a bucket: Level the attachment and reposition the indicator rod.

OUO6064,0000FDB-19-20180827