Mounting Frame Hardware—5500 Narrow Tractors Without Cab
W09905-UN-12NOV13
A - Mounting Frame
B - Cross Tie
C - Cap Screw and Washer, M16 x 50 (2 each side)
D - Cap Screw and Washer, M20 x 65 (4 each side)
E - Spacer (2 each side)
F - Cap Screw and Washer, M20 x 65 (2 each side)
Help prevent damage to the tractor or loader caused by operating with loose mounting hardware. Tighten the loader mounting frame hardware after the first 10 hours of operation and again after every 50 hours.
| Mounting Frame-to-Tractor Frame Hardware | ||
| M16 Cap Screw (C) | Torque | 275 N·m (200 lb·ft) |
| M20 Cap Screw (D and F) | Torque | 530 N·m (400 lb·ft) |
|
OUO6064,0000FDD-19-20180827 |