Mounting Frame Hardware—5425, 5525, 5603, 5083E Limited, 5093E Limited, 5101E Limited, and 5625 Tractors
W09804-UN-27AUG08
W09805-UN-27AUG08
Torque Sequence
A - Cap Screw and Washer, M20 x 90 (2 each side)
B - Cap Screw and Washer, M20 x 55 (4 each side)
Avoid damage to the tractor or loader caused by operating with loose mounting hardware. Tighten the loader mounting frame hardware after the first 10 hours of operation and again after every 50 hours.Tighten hardware to specification in the sequence shown.
| M20 Cap Screw (A) | Torque | 610 N·m (450 lb·ft) |
| M20 Cap Screw (B) | Torque | 530 N·m (390 lb·ft) |
|
OUO6064,0000FE5-19-20180827 |