Prepare the Tractor

  1. Prepare the tractor for the loader (Refer to Prepare Tractor section for the following.):

    • Removing front weights
    • Tire requirements
    • Tread settings
    • Rear ballast requirements

  2. W03106
    W03106-UN-11NOV98

    A - Exhaust Pipe Outlet

    Prevent damage to the tractor or loader caused by interference between the loader and exhaust pipe. Position the exhaust pipe outlet (A) forward.

    Install mounting frames. Refer to Installation Instructions available online.


  3. 5M series and 5105ML tractors: Install the multicoupler, if ordered. Refer to Installation Instructions available online.

  4. 5M series and 5105ML tractors: Install the toolbox support bracket and toolbox. Refer to Installation Instructions available online.

  5. Install the hood guard. Refer to Installation Instructions available online.

  6. Install the hydraulic valves and controls. Refer to Installation Instructions available online.

OUO6064,0000FEB-19-20180827