Display Screens

Warning Screens

Warning screens and alarms alert operator to monitor system operational problems.

NOTE: When warning screen appears, corrective action should be taken before continuing operation.

Warning and alarms will NOT prevent machine from starting, operating or recording data.

Each warning screen displays a specific operational problem and recommended corrective action.

Full Page Warning Screens

NOTE: RUN, SETUP, and INFO keys will not be active during this display.

Full page warning will override any other display function in progress.

Audible alarm will sound at highest level. If a CAUTION or ADVISORY alarm is in progress when a full page warning occurs, that alarm will be interrupted and full page warning alarm will sound.

Full Page Caution Screens

Cautions are displayed at bottom of RUN pages or as a full screen display of GreenStar display is not a RUN page.

NOTE: Display screen "Symptoms" refer to illustration labeled with a letter. See Display Screen Illustrations in this section to view each specific Symptom.

Symptom Problem Solution

KeyCard error warning screen (refer to illustration A).

Mobile processor does not recognize KeyCard in slot.

Verify that KeyCard is securely in slot (black eject button should be popped up).

Communication problem warning screen (refer to illustration B).

Data network communication problem.

Cycle power, if problem persists see your John Deere dealer.

OUO6050,0000773 -19-08JUN04-1/2


Symptom Problem Solution

Program not found warning screen (refer to illustration C).

Programs are not found on KeyCard.

Verify that programs are in correct directory on KeyCard.

No communication screen (refer to illustration D).

Position receiver communication problem.

Check all connections indicated on screen.

Cycle power, if problem persists see your John Deere dealer.

Battery voltage low (refer to illustration E).

Battery voltage too low at mobile processor.

Check battery voltage.

Check machine fuses. Replace as needed.

If problem persists, see your John Deere dealer.

Battery voltage low at mobile processor (refer to illustration F).

Battery voltage too low.

Check battery voltage.

Check machine fuses. Replace as needed.

Check system ground.

If problem persists, see your John Deere dealer.

OUO6050,0000773 -19-08JUN04-2/2