Features

• Straight Track mode assists operator in driving straight parallel paths by using display and audible tones to alert operator when machine is off track. (See Setup Straight Track for details).
• Curve Track mode assists operator in driving equally spaced Curve paths. System has capability to guide operator along a variety of patterns. (See Setup Curve Track for details).
• Circle Track mode assists operator in driving concentric circles by using display and audible tones to alert operator when machine is off track. (See Setup Circle Track for details.)
• Row Finder (Parallel Tracking Only) mode is intended for use in row crop applications where rows are not always equally spaced. Row Finder can be operated in two modes, continuous and turns only. (See Setup Row Finder for details).

Within these modes are the following additional features;

• Turning View provides an aerial view to assist operator when turning into a new path. (See Turning View in Setup Guidance System section for details).
• Mark Point feature allows storage of up to five geographical locations that operator can return to later.

  EXAMPLE: When using system in a sprayer application you can store location when you run out of spray solution, refill, and system will help return you back to exact location where you ran out. (See Mark Point in RUN Functions section for details).

• Shift Track allows operator to move A-B lines to left, right, or re-center based on machines current location. (See Shift Point in RUN Functions section for details).
• Adjustable Tracking Tones allow operator to adjust when audible signal for off track error will sound. (See SETUP section for details).
• Offsets
  • Implement Offset allows operator to "move" position of receiver to center of an implement that does not pull centered behind tractor.
  • Receiver Offset allows operator to "move" position of receiver not mounted in the center of the cab. This offset is for left/right adjustment..

OUO6050,0001EF7 -19-18OCT06-1/2

• Aerial View (Curve Track mode only) is an overhead view that aids operator in performing field operation.

OUO6050,0001EF7 -19-18OCT06-2/2