Before You Start

NOTE: On start-up, INITIALIZING SYSTEM will be displayed on RUN - PAGE 1 screen. This message will self-cancel once power up sequence is completed. After power up sequence is completed, display will show RUN - PAGE 1 screen, or if full page mode was active when machine was shut down it will return to full page mode. To change screen, press PAGE , SETUP or INFO buttons.

AutoTrac can only be operated when KeyCard is installed into mobile processor.

A-Full Page
B-Mark Point
C--
D-Productivity
E-Area
F-Area Counter are: Off
G-No GPS. Tracking Disabled

OUO6050,0001EFD -19-28SEP06-1/1