|
IMPORTANT:
SF1 and SF2 are StarFire licensed satellite differential correction subscriptions. RTK (Real Time Kinematic) is a land-based form of differential correction. Optimal system performance will be achieved with SF2 correction signal or RTK. When using SF2, accuracy may continue to increase after powering up system.
15 minute Pass-to-Pass accuracy when using SF1 correction is +/-13 inches 95% of the time.
15 minute Pass-to-Pass accuracy when using SF2 correction is +/-4 inches 95% of the time.
|
PROGRAMMING PROCEDURES
-
Install and Reprogram Components From Yield Mapping to a Guidance System:
Use this procedure when moving components from another vehicle. Use this programming procedure to manually re-program components to a guidance system.
-
Programming Components For Guidance System Operation-Automatic Software Load:
General programming procedure from most GreenStar systems to a guidance system. This procedure will program components for guidance systems operation in most cases.
-
Programming Second Display:
Use this procedure in conjunction with programming procedures to operate a guidance system using two displays.
|