Circle TrackNOTE: When operating in Circle track it is not necessary to drive tracks in a specific order, display will always show closest track. Track number is displayed in lower left hand corner Tracking display. Track number displayed is track number closest to machine and is automatically updated by system as a new track is approached. Track number changes when machine is half way between two tracks. Error distance is shown in lower right-hand corner of Tracking display. This number shows how far from closest track machine is. Error number will count until machine reaches point halfway between two tracks. After reaching mid-point error number will count down. If turning view is OFF, operator, by watching error value approach 0, will know where to turn to line up with next Circle. If circle center has not been set RUN - PAGE 1 screen will display NO A-B LINE DEFINED.
If differential correction is not available, both track number and error number will be 0 and navigation bar will missing.
Navigation bar indicates relative position of machine closest track. Bar will move either left or right as machine moves through field. |
|
OUO6050,0001F12 -19-18OCT06-1/1 |