Enabling System

The system is enabled when ON is shown under STEER. System is disabled when OFF is shown under STEER. Press letter button next to STEER to toggle between enable/disable AutoTrac.

To enable system, all of the following criteria must be met:

  • AutoTrac KeyCard has been inserted into mobile processor.
  • Tracking has been setup. (See Setup Tracking).
  • Tracking is ON.
  • SSU is in normal operating mode.
  • 4700 Series Sprayer is in 1st, 2nd, or 3rd range.

    4900 Series Sprayer is in Field Mode

  • Hydraulic oil is warmed to minimum specification.

Specification

Hydraulic Oil Minimum Temperature -Temperature 10 °C (50 °F)
  • TCM must be installed, calibrated, and turned on.


A--
B--
C--
D--
E-Steer
F-3D, SF2 Signal / Shift Track, Mark Point
G-Return

PC9633

OUO6050,0001F21 -19-18OCT06-1/1