Enabling System

The system is enabled when ON is shown under STEER. System is disabled when OFF is shown under STEER. Press letter button next to STEER to toggle between enable/disable AutoTrac.

To enable system, all of the following criteria must be met:

• AutoTrac KeyCard has been inserted into mobile processor.
• Tracking has been setup (see Setup Tracking).
• Tracking is ON.
• SSU is in normal operating mode.
• TCM must be installed, calibrated, and turned on.

A--
B--
C--
D--
E-Steer
F-3D, SF2 Signal / Shift Track, Mark Point
G-Return

OUO6050,0001F28 -19-18OCT06-1/1