Shift Track

NOTE: Shift Track is only available in Full Page Mode. Since all tracks are based on original track 0, all tracks will be shifted by using this feature.

Shift Track increases system performance by compensating for GPS drift.

Shift track is used to adjust position of machine left, center or right of set track. Shift track can be used to compensate for GPS drift. Drift is inherent to any satellite-based, differentially corrected GPS system.

Shift Track allows an operator to move A-B line to right or left in hundredths of a meter (0.03) or one tenth of a foot (0.1) depending on selection of unit standard. An operator may also re-center displayed line on icon.

To move line to left, press 1 button on numeric keypad. To move line to right, press 3 button on numeric keyboard. Each time button is pressed, line will move three hundredths (0.03) of a meter or one tenth (0.1) of a foot to left or right. To re-center line on vehicle's current location press 2 button on numeric keypad.

Shift Track can be used to compensate for GPS drift that occurs over time.

A--
B--
C--
D--
E-Steer
F-3D, SF2 Signal / Shift Track, Mark Point
G-Return

OUO6050,0001F2C -19-18OCT06-1/1