OMPC20699: Original GreenStar™ Display—Guidance, Block File: OUO6050_0001F43_19

IMPORTANT: If CAN Bus voltage is manually changed it will automatically be reset to AUTO at system power up.

Screen: INFO - CAN BUS - PAGE 1

Press: INFO >> GREENSTAR DISPLAY >> CAN BUS ANALYZER

This screen is used by factory in order to help with diagnosing system.

Screen: INFO - CHANGE CAN LAYER screen

Press: INFO >> GREENSTAR DISPLAY >> CAN BUS ANALYZER >> CAN PHYSICAL LAYER

A-Source ID / Message Count
B--
C--
D--
E-CAN Physical Layer
F-Bus Off Count
G-Return

OUO6050,0001F43 -19-18OCT06-1/3

This screen is used to change CAN Bus layer by pressing desired selection button.

A-Auto
B--
C--
D--
E--
F--
G-Return

OUO6050,0001F43 -19-18OCT06-2/3

A warning screen will be displayed when changing CAN Bus layer. Press letter button next to CONTINUE to proceed or G button to cancel.

A--
B-Changing the CAN Physical Layer can Make the Display Inoperable.
C--
D-Press F to Continue or G to Cancel
E--
F-Change Layer Continue
G-Return

OUO6050,0001F43 -19-18OCT06-3/3