|
Display is blank.
|
No power.
|
Check harness connections at display.
|
|
|
Out of contrast or insufficient backlighting.
|
Adjust contrast.
|
|
|
|
Change backlighting level.
|
|
Display audible alarm does not sound.
|
Possible failed alarm.
|
See your John Deere dealer.
|
|
Display is locked up on a certain page.
|
Communication problem.
|
Turn key switch OFF and ON.
|
|
Dual display will not operate properly.
|
Incorrect display address.
|
Make sure Parallel Tracking display is set to auxiliary 1 and main display is set to primary.
|
|
|
|
If using a single display make sure address is set to primary.
|
|
Parallel Tracking system is slow or sluggish.
|
Incorrect update rate.
|
Make sure receiver is set to 5 Hz.
|
|
Display does not work properly.
|
Incorrect display software.
|
See your John Deere dealer for display upgrade kit PF90091.
|