Warning Screens

Warning screens and alarms alert operator to monitor system operational problems.

NOTE: When a warning screen appears, corrective action should be taken before continuing operation.

Warning and alarms will NOT prevent machine from starting, operating or recording data.

Each warning screen displays a specific operational problem and recommended corrective action.

NOTE: The RUN, SETUP, and INFO keys will not be active during this display.

Full page warning will override any other display function in progress.

Audible alarm will sound at highest level. If a CAUTION or ADVISORY alarm is in progress when a full page warning occurs, that alarm will be interrupted and full page warning alarm will sound.

Cautions are displayed at bottom of RUN screens or as a full screen if not a RUN screen.

KeyCard error warning screen.

Mobile processor does not recognize KeyCard in slot.

Verify that KeyCard is securely in slot (black eject button should be popped up).

Communication problem warning screen.

Data network communication problem.

Cycle power, if problem persists see your John Deere dealer.

Program not found warning screen.

Programs are not found on KeyCard.

Verify that programs are in correct directory on KeyCard.

No communication screen.

Position receiver communication problem.

Check all connections indicated on screen.

OUO6050,0001F86 -19-18OCT06-1/2

Cycle power, if problem persists see your John Deere dealer.

Battery voltage low.

Battery voltage too low at mobile processor.

Check battery voltage.

Check machine fuses. Replace as needed.

If problem persists, see your John Deere dealer.

Battery voltage low at mobile processor.

Battery voltage too low.

Check battery voltage.

Check machine fuses. Replace as needed.

Check system ground.

If problem persists, see your John Deere dealer.

OUO6050,0001F86 -19-18OCT06-2/2