|
Shift Track is only available in Full Page Mode. Since all tracks are based on original track 0, all tracks will be shifted by using this feature.
In Circle Track mode Shift Track is not used to compensate for GPS drift. Shift Track increases of decreases the circumference of the Track the vehicle is on. If the center Shift Track button is pressed the Track will be centered on the vehicles current location.
Shift Track allows an operator to increase or decrease the circumference of the Track the vehicle is on to the
|
right or left three hundredths of a meter or one tenth of a foot depending on selection of unit standard. Operator may also recenter display line on icon.
To move line to left press 1 on numeric keypad. To move line to right press 3 on numeric keypad. Each time button is pressed, line will move three hundredths of a meter or on tenth of a foot to the right or left. To re-center line on the vehicle's current location press 2 on numeric keypad
|