|
Tracking Mode refers to the AutoTrac mode being used with the system (Straight Track, Circle Track, or Curve Track). With Straight Track and Curve Track, multiple A/B lines can be set based off the initial track and implement width. However, in Curve Track mode, the track is navigated from the last-recorded pass. While John Deere Curve Track software "smooths" the track to record a better curved line, there is still the opportunity for greater error on the ground with Curve
|
Track than in both Straight Track and Circle Track. Once all tracks have been laid and the vehicle is operating in repeat mode, the vehicle still has the possibility for increased error due to the machine characteristics while navigating through a curve pass. GPS Signal Accuracy, Vehicle Setup, Implement Setup, and Field/Soil Conditions still affect the accuracy equation.
|