|
Reduces amount of time required before full accuracy is achieved. If QuickStart is enabled (check box checked) and receiver has SF1 or SF2 when it is powered down a position is saved for future QuickStart. If power is restored to receiver within time period defined under Hours On After Shutdown, QuickStart won't be needed since receiver power was never disrupted. If duration has exceeded Hours On After Shutdown, QuickStart will be initiated. Saved
|
position will be used to bypass startup warm up period that is usually required. Receiver cannot move while this QuickStart is taking place. It may take up to 6 minutes for QuickStart to complete. User will be notified on screen when it is done.
To enable QuickStart mode select check box so that a check appears. To disable, select check box until check disappears.
|