RTK Vehicle Security Status
The RTK Vehicle (when operating off of a Secure Network ID) will exist in one of the three following RTK authorization states: Unknown, Authorized, or Not Authorized.
Unknown
› The RTK Vehicle StarFire upon power up is in an "unknown" RTK authorization state. It will exist in this state until communication with the base station is established. No message will be displayed in cell G of the GreenStar Monitor.
Authorized
› On power-up of a RTK Vehicle StarFire that is properly configured and on the authorization list , the message "RTK Network: Authorized" will be displayed in cell G as soon as it establishes communication with the secure RTK base station and it determines that it is authorized to receive RTK corrections.
Unauthorized
› On power-up of a RTK Vehicle StarFire that is properly configured, but the serial number has not been entered into the base station RAL, the message "RTK Network: Not Authorized" will be displayed in cell G as soon as it establishes communication with the secure RTK base station and it determines that it is not authorized to receiver RTK corrections.
|