INFO - GPS - PAGE 3

Screen: INFO- GPS - PAGE 3

Press: INFO >> STARFIRE ITC >> PAGE >> PAGE

This page shows detailed information about receiver. This information will help troubleshoot receiver if a problem occurs.

Activations: Activations displays all activation codes that have been entered into receiver. SF1, SF2, and/or RTK. Visit www.StellarSupport.com for additional activations.

SF2 License: If receiver currently has active SF2 license, YES will be displayed. If not, NO will be displayed.

SF2 End Date: Date SF2 license will expire.

Receiver Hours: This cell displays number of hours on receiver.

Serial Number: This cell shows receiver serial number. This is required to obtain a StarFire signal license.

Hardware Version: This cell shows part number of receiver.

Software Version: This cell displays version of software being used by receiver.

NOTE: To acquire the latest version of software, visit www.stellarsupport.com or contact your John Deere dealer.

A-Activations SF1, SF2 Ready, TRK
SF2 License
B-SF2 End Date
Receiver Hours
C-Switched Volt
Unswitched Volt
D-CAN High Volt
CAN Low Volt
E-Hardware Part Number
Hardware Serial Number
F-Software Application Version
Software Loader Version
G--

JS56696,00005C9 -19-13MAY09-1/1