GREENSTAR
™
Display IV Fault Codes
Select
Menu
->
Original GreenStar Display
icon (softkey H). The 2100/2600 display now is emulating the GreenStar IV display. Then follow directions for each components' fault codes.
Press the INFO button on the GREENSTAR Display. Then press the button next to the entry
GreenStar Display
followed by pressing the button next to the words
Recent Problems
. The codes will be displayed on this page with a short description following the code. To clear these Fault Codes, press the button next to the words
Clear
.
Messages generated by a problem controllers are sent to the GREENSTAR Display over the CAN Bus network.
STARFIRE iTC Diagnostic Trouble Codes
STARFIRE iTC Diagnostic Trouble Codes can be viewed by pressing the INFO button on the GREENSTAR Display. Then pressing the button next to the entry
StarFire Receiver
. Then press the Page button once to get to Page 2. Then press the button next to
Diagnostic Trouble Codes
. This page will show the
Active
and
Previously Active
codes.
|
Pressing the button next to a code will supply the operator or technician more information about the code. It will give a detailed description, time of last occurrence, and occurrence count. To clear the codes go back to previous page and press button next to
Clear All Codes
.
Terrain Compensation Module Fault Codes
Terrain Compensation Module Fault Codes can be viewed by pressing the INFO button on the GREENSTAR Display. Then pressing the button next to the entry
TCM
followed by pressing the button next to the words
Fault Codes
. The codes will be displayed on this page with a short description following the code. To clear these Fault Codes, press the button next to the words
Clear
.
Parallel Tracking Fault Codes
Parallel Tracking Fault Codes can be viewed by pressing the INFO button on the GREENSTAR Display. Then pressing the button next to the entry.
Tracking
followed by pressing the button next to the words
Fault Codes
. The codes will be displayed on this page with a short description following the code. To clear these Fault Codes, press the button next to the words
Clear
.
|