Obtaining Activation Code & Activating Software In Display

PC8663-UN-05AUG05

MENU button

PC8661-UN-02NOV05

GREENSTAR2 PRO button

PC8675-UN-14OCT05

GREENSTAR2 PRO button

NOTE: The display Serial Number and Challenge Code are found at MENU button > GREENSTAR2 PRO button > GS2 button > ACTIVATIONS tab

Get the 6-digit Comar order number from your dealer for the GS2 Pro package you have purchased (AutoTrac, PivotPro, SwathControl Pro).

Get the serial number and challenge code from the display.

Go to www.StellarSupport.com and select ACTIVATIONS AND SUBSCRIPTIONS.

Select GREENSTAR2 > ACTIVATE AUTOTRAC, then follow the GreenStar2 Software Activation prompts to obtain the 26-digit code.

On the display, go to: MENU > GREENSTAR2 PRO button > GREENSTAR2 PRO button > ACTIVATIONS tab

Input the activation code.

Display shows as Activated in the Pro Module area.

The Display Software Activation Process is completed. Keep in mind if you have purchased SF2 level AutoTrac, you are required to also activate the StarFire receiver to an SF2 level. The StarFire is a separate 24 digit activation for SF2 and RTK.