Accessing Original GREENSTAR Display Fault Codes

GreenStar™ Display IV Fault Codes

Select Menu -> Original GreenStar Display icon (softkey H). The GS2/GS3 display now is emulating the GreenStar Original or GSD4 displays. Then follow directions for each components' fault codes.

Press the INFO button on the GREENSTAR Display. Then press the button next to the entry GreenStar Display followed by pressing the button next to the words Recent Problems. The codes are displayed on this page with a short description following the code. To clear these Fault Codes, press the button next to the words Clear.

Messages generated by a problem controllers are sent to the GREENSTAR Display over the CAN Bus network.

StarFire 3000 Diagnostic Trouble Codes

StarFire 3000 Diagnostic Trouble Codes can be viewed by pressing the INFO button on the GREENSTAR Display. Then pressing the button next to the entry StarFire Receiver. Then press the Page button once to get to Page 2. Then press the button next to Diagnostic Trouble Codes. This page shows the Active and Previously Active codes. Pressing the button next to a code supplies the operator or technician more information about the code. It gives a detailed description, time of last occurrence, and occurrence count. To clear the codes go back to previous page and press button next to Clear All Codes.

Parallel Tracking Fault Codes

Parallel Tracking Fault Codes can be viewed by pressing the INFO button on the GREENSTAR Display. Then pressing the button next to the entry. Tracking followed by pressing the button next to the words Fault Codes . The codes are displayed on this page with a short description following the code. To clear these Fault Codes, press the button next to the words Clear.