Correction Frequency

Correction Frequency—frequency used to receive differential correction signals. The default frequency is a view only field when default check box is checked. By de-selecting default check box, a correction frequency can be manually entered.

John Deere broadcasts differential GPS corrections from its StarFire network on 6 satellites around the Earth for global coverage. When the default box is checked, the receiver automatically tunes to the StarFire receiver based on which satellites are visible at its location. The receiver searches for StarFire signals starting with the highest elevation satellite and then search for the lowest until it acquires a signal. The manual tuning option is available by de-selecting the default frequency box, but it should only be used under direction from AMS personnel or a John Deere dealer.

IMPORTANT: DO NOT change default StarFire Correction Frequency unless instructed to do so by a John Deere Dealer or by John Deere AG Management Solutions.