Display Software Activations

The display comes preloaded and activated with GreenStar Basics Software which includes:

• Guidance
  • Parallel Tracking
• Documentation
  • Harvest Doc
  • Map Based Prescriptions
  • Field Doc including (Field Doc Sprayer, Field Doc Planter, Field Doc Air Cart, and Field Doc Connect)

Software activations are required to operate AutoTrac and can be purchased from your local John Deere Dealer.

Items REQUIRED to Activate AutoTrac

1. Display Serial Number (Found in display)
2. Display Challenge Code (Found in display)
3. Comar order number (from dealer once order is placed)
4. Visit StellarSupport.Deere.com to obtain a 26-digit activation code.

Current Purchased Software Activation options are as follows:

• SF1 AutoTrac — +/- 33 cm (+/- 13 in.) at receiver
• SF2 AutoTrac — +/- 10 cm (+/- 4 in.) at receiver
• SF1 to SF2 AutoTrac upgrade
• Pivot Pro (AutoTrac Circle operation for center pivots, requires an AutoTrac activation first)
• John Deere Section Control

The display software activations (Pro-Modules) are 26-digit pin numbers that are separate from the StarFire 24-digit GPS activation number. The display software is only activated once for the life of the display and requires no other fees.