Row Finder Mode

Theory of Operation

Row Finder (Parallel Tracking Only) mode is intended for use in row crop applications where rows are not always equally spaced. Row Finder will aid the operator in finding which set of rows to enter back into the field on after setting a reference point when coming out of the previous set of rows.

Track 0 Setup

GUIDANCE SETTINGS tab >> TRACKING MODE drop-down box >> ROW FINDER.

NOTE: Row Finder can only be operated in Parallel Tracking Mode.

Distance to Center of Pivot is only available in Circle Track Mode.

Track Spacing must be set for operation of this mode.

Set track spacing in EQUIPMENT softkey >> IMPLEMENT tab.

Operating Row Finder

To use Row Finder press SET ROW button at end of pass before starting turn.

IMPORTANT: For optimal performance the SET ROW button must be pressed before machine begins making turn at end of pass.

Track 0 will be reset based on current track spacing, position, and heading. After starting turn, turning view will guide operator into next pass.

NOTE: If SET ROW button is pressed when machine is stopped, system will reset track 0 based on a 0° heading.