Theory of Operation

NOTE: The following functionality may not be available in all countries at time of publication.

John Deere Remote Display Access (RDA) enables JDLink™ users to view the operating GreenStar™ 3 2630 display from a remote location. With this feature, you will be able to assist the operator efficiently in making changes within the display regarding setup, optimization, and troubleshooting.

How it Works

Remote Display Access uses a communications modem/controller (MTG), cellular antenna, and Ethernet cable installed in a machine to send images of display screen changes to a web browser.

Easy to use and understand

To use John Deere Remote Display Access, the equipment must have a GreenStar 3 2630 display, JDLink Modular Telematics Gateway (MTG) hardware, a current JDLink subscription that includes Remote Display Access, and an Ethernet cable to connect the display to the MTG.

From a remote computer or a mobile device, users are able to log in to JDLink or MyJohnDeere.com and select the machine that they would like to view. Selecting Remote Display Access for that piece of equipment provides access to the display in the cab. The operator’s view of the GreenStar 3 2630 display data will be sent through the ethernet cable to the MTG, and from the MTG to the John Deere communications network via the wireless cellular data connection. The display information is then passed along to the users computer through the internet. The machine’s GreenStar display can then be viewed by the remote user, and cell phone or radio communication can be made to make necessary adjustments to the operator’s John Deere display.