Active Implement Guidance Requirements

Active Implement Guidance Functional Requirements:

Hardware:

• GreenStar™ 2 1800 Display, GreenStar™ 2 2600 Display, GreenStar™ 3 2630 Display, or GreenStar™ 3 CommandCenter™.
• StarFire™ Receiver installed on machine.
• StarFire™ Receiver installed on implement.
• Application Controller 1100 with Active Implement Guidance activation installed on machine. NOTE: Active Implement Guidance activation is displayed on Application Controller activations page.
  
• Implement-mounted steering angle sensor. NOTE: Wheel angle sensor is not required for implement shifting applications.
  
• Hydraulic steering mechanism mounted on implement.
• Various harnesses associated with power supply, controller integration, sensor communication, and steering control.

Software:

• Active Implement Guidance operation requires both receivers to have an RTK signal level, unless shared signal is used. NOTE: Controller must be set up for Implement Steer or Implement Shift functions to enable shared signal. A GreenStar™ 3 2630 Display and StarFire™ 3000 are required to use shared signal.
  
• Updated StarFire™ Receiver software (Active Implement Guidance only).
• Machine receiver setup and TCM calibrated.
• Implement receiver setup and TCM calibrated.
• AutoTrac™ activation on display (not required to steer system manually).
• AutoTrac™ and Active Implement Guidance setup complete (incomplete AutoTrac™ setup prevents operator from activating guidance).