Setup Checklist

Check and perform the following items before using Active Implement Guidance.

Implement Steering

• Calibrate SCV Thresholds.
• Adjust and tune steering sensitivities.
• Calibrate machine and implement TCM.
• Calibrate Left, Right, and Center positions.
• Adjust counterbalance valve (if applicable).
• Extend on SCV results in an increasing wheel angle sensor voltage.
• Retract on SCV results in a decreasing wheel angle sensor voltage.

Implement Shifting

• Adjust SCV Flow Rate.
• Adjust counterbalance valve (if applicable).
• Calibrate SCV Thresholds.
• Calibrate machine and implement TCM.