Swath Control

Swath Control automatically turns sections ON and OFF based on the following conditions:

• Previous Coverage - The system will turn sections off when it enters an area that has already been covered.
• Exterior Boundaries - The system will turn sections off when they go outside of a previously recorded exterior boundary. Sections will turn on when they re-enter the boundary.
• Interior Boundaries - Interior boundaries, or no-spray zones, can be set up for any field. The system will turn sections off when passing inside of a previously recorded interior boundary. Sections will turn on when exiting the boundary.

The on-screen map gives an operator a visual reference for when sections are turned on and off.

Swath Control will only function on vehicles and implements with compatible software:

• SprayStar version 5.11 or higher
• 5430 Sprayer(European only)
• All versions of GS Rate Controller
• All versions of SeedStar 2: Planters, Air Carts, and 1990CCS.

A 15 hour (actual use time) demo code is available on every new display. The 15 hours count down when Swath Control is activated, and the master switch is on. When the demo period is over, Swath Control will be unavailable until an activation code is purchased through a John Deere Dealer, and entered into the display.