Activating GreenStar Pro Modules

PC10857JC-UN-13APR09

Menu Button

PC10857JN-UN-13APR09

GreenStar Button

PC10857JF-UN-13APR09

Settings Button

PC10857JG-UN-13APR09

Activation Button

The date and time must be set correctly on your display before entering Activation Codes.

Software activations are required to operate the optional Pro Modules

• AutoTrac
• PivotPro
• Swath Control

Activations can be purchased from your local John Deere Dealer. The display software Activation Codes are separate from the StarFire 24 digit GPS activation numbers. The following items are REQUIRED to activate a Pro Module:

• 6 digit COMAR order number (obtained from your dealer)
• Display Serial Number (found in display)
• Display Challenge Code (found in display)

Once you have obtained the 6 digit COMAR order number from your dealer for the GreenStar Pro Module you have purchased, visit StellarSupport.com to obtain a 26 digit Activation Code. Follow these steps:

1. Select MENU > GreenStar > Settings > Activations

2. Find the Serial Number and Challenge Code on your display.

3. Go to StellarSupport.com and select 'GreenStar Pro Module' under Activations and Subscriptions. You may need to register for an account.

4. Select your display model and enter your Serial Number and Challenge Code.

5. Follow the prompts to obtain the 26 digit code.

6. Enter the 26 digit code in your display (Menu > GreenStar > Settings > Activations > Enter Code).

7. You will now see Activated in the Activations page area.

8. This completes the Display Software Activation Process. Keep in mind, the activations you have purchased may be transferred from other GreenStar displays to this display.