Using Service Interval Reminders

The operator is able to view and change the Service Intervals Field. The valid range is 0 - 990 hours. Setting the interval to 0 disables the function.

When “Service Interval-Hours Since Service” is less than 20 hours to next service, the operator will see this notification.

The operator is able to manually reset the hours since service value, at which time an alarm will display confirming that the total should be reset. On CAN-Based vehicles, the operator will need to select and HOLD the reset button for 3 seconds.

Calibrating Wheel Slip and Radar

Calibrating wheel sleep and radar is only necessary if a radar speed source is wired directly to the GS2 1800 display. It is not required if the display is installed in a late model CAN based John Deere vehicle.