ISO Display

Before using display to control ISOBUS implements, read operator manual provided by implement manufacturer and observe all safety messages in manual and on implement prior to use. When used with ISOBUS implements, information and control functions placed on this display are provided by implement and are the responsibility of implement manufacturer.

One function of the GS2 1800 is to operate as an ISO virtual terminal. This means any brand of implement that is an ISOBUS Virtual Implement can be plugged in and run through the GS2 1800 display. One example of an ISOBUS implement is the SeedStar™ 2 system for new John Deere planters and air seeding equipment.

To control an ISO implement with the GS2 1800 display:

1. Connect the ISO implement to the vehicle and power-up the display.

2. Select the Menu button.

3. Choose the icon associated with the ISO implement.

4. Control the implement according the operator's manual for that device.