Recording Coverage Maps

If an AUTO Recording Source is being used, ALL of the following are required for Coverage Recording to function:

• Setup Wizard is complete
• GPS signal (StarFire signal required)
• Master Switch is on (if present)
• At least one section switch is ON (if present)
• Implement is in working position or solution pump is on (sprayer)

PC10857XJ-UN-16JUN10

Manual Record Button

PC10857KP-UN-13APR09

Implement "Whisker" Switch

On 50 and 60 series combines, the Header Set Point may need to be adjusted on the corner post display for the Auto Recording Source to work. On 00 and 10 series combines, the Auto Recording Source is not available.

If an Implement (“Whisker” Switch) Recording Source is being used, ALL of the following are required for Coverage Recording to function:

• Setup Wizard is complete
• GPS signal (StarFire signal required)
• Implement is in working position

If a Manual Recording Source is being used, ALL of the following are required for Coverage Recording to function:

• Setup Wizard is complete
• GPS signal (StarFire signal required)
• Manual Recording button is toggled ON

If an AUTO or Implement Switch Recording Source is being used, the Manual Recording ON/OFF button will be disabled.