Creating a New AB Curve Track

PC10857JN-UN-13APR09

GreenStar Main Page

PC10857JJ-UN-13APR09

Guidance Quick Change

Use the following procedure to setup the first AB curve (Track 0) from, which subsequent curve passes in the field are based.

Multiple AB Curves may be recorded per field. They will need to be named and recorded separately.

1. Choose AB CURVE TRACK mode and select or create a Track Name on the final page in the Setup Wizard (SETUP GUIDANCE TRACK).

   This page can also be accessed with the Quick Change Guidance softkey.

2. Drive to desired location in the field for start of Track 0.

3. Selecting the AB Curves Start Recording softkey. This softkey will be replaced by the following softkeys after it is selected:

   • Pause Recording
   • Stop Recording
   • Cancel.
   
   

4. Drive the initial pass. A blue guidance track will appear on the map.

   When driving straight, the recorded path may not be shown behind the machine icon on the display. The path will appear when the machine is turned.

5. Press Stop Recording at the end of the pass and the track will be saved to memory.

   If GPS signal is lost while recording, recording is stopped and the AB curve that was recorded to that point will be saved. If the AB Curve is not what the operator intended, it may be deleted by using the Delete Track button on the SETUP GUIDANCE TRACK page of the SETUP WIZARD.