Guiding on a Previously Recorded Track

PC10857JN-UN-13APR09

GreenStar Main Page

PC10857JF-UN-13APR09

Setting

PC10857NG-UN-27APR09

Guidance Settings

If it is desired to have repeatability with saved Adaptive Curve Track data, it is required that the initial track data and subsequent trips across the field be created using StarFire RTK accuracy. RTK base station should be operating in Absolute Base mode.

The track spacing for Adaptive Curve Track data is constant. If a different implement width is used when returning to the field, new data must be recorded.

1. Select a field that has previously recorded Adaptive Curve Track data associated with it. The previously track will reappear on the map.

2. Turn ON Repeat Mode in GUIDANCE SETTINGS to guide on a previously recorded Adaptive Curve Track. Repeat Mode allows the guidance track to be displayed when Recording is OFF.

   Select Curve Settings

3. Drive the vehicle onto the track and a highlighted white navigation line will appear in front of the vehicle.

4. Press Resume Switch (AutoTrac only) on the machine and the machine will automatically steer on that pass. For Manual Guidance, guide on the white highlighted navigation line.