Guiding on a Circle Track

When operating Circle Track it is not necessary to drive tracks in a specific order. Depending on your zoom level all tracks that can be displayed will show up on the screen with the closest Track designated by a thicker line. The track number is displayed below the path accuracy indicator and is automatically updated by system as a new track is approached. Track number changes when machine is half way between two tracks.

Off Track error distance is shown in the path accuracy indicator. This number shows how far from closest track machine is. Error number will count up until machine reaches point halfway between two tracks. After reaching midpoint error number will count down as machine approaches next track.

Distance to end of pass utilizing Turn Predictor is shown in the top right portion of the guidance view. Distance will count down to predicted turn and tones will sound when machine is 10 seconds from intersecting turn point and again when predicted turn point has been reached.

Track spacing may require adjustment due to operator and/or GPS error.

EXAMPLE: An operator may want to enter a slightly smaller implement width to account for operator error while steering or GPS error.