Accuracy

Accuracy in Slope Conditions - Circle Track was designed for center pivot operation on ground with less than 2% slope. Customers who use circle track on slopes greater than 2% need to be aware of the performance of circle track in these conditions and why circle track performs the way that it does. In operating Circle Track in some slope conditions there are cases where the circle track spacing and the center pivot tower track will not match in tower tracks away from the center pivot. This is due to the difference between distance traveled over a hill and on a level plane. AutoTrac draws the circle spacing as if the plane were level. The tower tracks obviously go over the hill terrain. This difference in distance will increase as slope increases.

See the DIAGNOSTICS section for an overview of AutoTrac Accuracy.