Backup Data to a USB storage device
-
Select or create a Profile name to store the data under. Profiles
already on the USB storage device will appear in the list.
If you choose a previously created Profile from the
USB, it will be deleted and replaced. This display does not merge
or sync data. When using the same USB storage device with two or more
GreenStar displays, you may wish to use separate profiles for each
display to avoid losing data.
-
Enter a Check in the box if you would like to clear the internal
memory of the display after data transfer.
-
PC10857JP-UN-13APR09
Next button
Select Next button.
-
A message will appear when data transfer is complete. Accept
it and remove the USB storage device.
Removing the USB storage device, removing power to
the display, or cranking the engine before this message appears may
result in loss of data.
|
OUO6050,00010E6-19-20100607
|
|