Preseason Checklist

In addition to performing checklist before season begins, utilize preseason checklist if any of the following occur:

• A different tractor or implement is introduced to system.
• A hydraulic system component is repaired, replaced, or adjusted.
• An Ag Management Systems (AMS) component is replaced.

□  Refer to electronic Operator’s Manual from Manuals.Deere.com or contact your John Deere dealer for latest version.

□  Update software. Refer to StellarSupport.com for latest software.

□  Display

□  Controller

□  Load and activate applications on display.

□  Inspect wiring harness for wear and damage around pinch points, corners, edges, and harness support locations. Repair as necessary.

□  Inspect connector seals and latching mechanisms. Repair as necessary.

□  Inspect connector pins for wear, debris, and corrosion. Clean and (or) repair as necessary.

□  ISO connector

□  Controller connectors

□  Display

□  Inspect mounting hardware. Retorque as necessary.

□  Display

□  Controller mount

□  Calibrate sensors and control values.

□  Verify switch functionality if switchbox is present.

□  Perform system voltage test.

□  Perform flow control test.

(Reference implement Operator’s Manual for detailed checklists.)

NOTE: Some tests are not available depending on application.