Set Up Dual Boom (If Equipped)

PC11335
PC11335-UN-01OCT08

Dual Boom

A - Dual Boom On/Off Checkbox

B - Dual Boom Activation Input Box

Dual boom allows for a second rank of nozzles to activate when high speeds and/or application rates are required. This allows for pressure and nozzle pattern to remain consistent.

If current speed is above threshold indicated, dual boom activates. When speed drops 10% below value, dual boom deactivates.

To set up dual boom:

  1. Select dual boom On/Off checkbox (A) to enable dual boom.

  2. Enter speed value in Dual Boom Activation input box (B). When speed value is reached, dual boom becomes active.

NOTE: Dual boom is only available for sprayers with 3-wire section valve type.

HC94949,0000739-19-20150202