Operate Guidance Systems Safely

Do not use guidance systems on roadways. Always turn off (disable) guidance systems before entering a roadway. Do not attempt to turn on (activate) a guidance system while transporting on a roadway.

Guidance systems are intended to aid the operator in performing field operations more efficiently. The operator is always responsible for the machine path. Guidance systems do not automatically detect or prevent collisions with obstacles or other machines.

Guidance Systems include any application that automates machine steering. This includes, but may not be limited to, AutoTrac™, iGuide™, iTEC™ Pro, AutoTrac™ Universal (ATU), RowSense™, and Machine Sync.

To prevent injury to the operator and bystanders:

• Never get on or off a moving machine.
• Verify the machine, implement, and guidance system are set up correctly.
  • If using iTEC™ Pro, verify accurate boundaries have been defined.
  • If using Machine Sync, verify the follower’s home point is calibrated with sufficient space between the machines.
• Remain alert and pay attention to the surrounding environment.
• Take control of the steering wheel, when necessary, to avoid field hazards, bystanders, equipment, or other obstacles.
• Stop operation if poor visibility conditions impair your ability to operate the machine or identify people or obstacles in the machine path.
• Consider field conditions, visibility, and machine configuration when selecting machine speed.