Receiver
PC13798-UN-02JUN11
Receiver Accuracy Warning
| Symptom | Problem | Solution |
|
Receiver Accuracy Warning is displayed. | Correction signal is higher on implement receiver. |
Shared signal automatically uses machine correction signal. Install receiver with higher correction signal on machine. Accuracy warning does not disable shared signal. |
|
Unable to utilize shared signal when machine is moving. | Software issue. |
Ensure application controller, display, and receiver have latest software. (Reference Service section.) |
|
iGrade™ application is active. |
Set SCV1 or SCV3 Control Type to Implement Steering and ensure neither Control Type is set to iGrade™. |
|
|
Both receivers utilize real time kinematics (RTK) and RTK is turned on. |
Turn off RTK on implement receiver. (Reference StarFire™ Receiver Operator’s Manual.) |
|
|
Fore and aft values for implement receiver are not set to zero. |
Set implement fore and aft values to zero. |
|
iGrade is a trademark of Deere & Company StarFire is a trademark of Deere & Company |
AE77568,000011D-19-20150805 |