Requirements

Hardware

• Modular Telematics Gateway (MTG) Machine Harness
• MTG Controller with serial number (three options):
  • PCMAMGA700000 or above
  • PCMAMGB100000 or above
  • PCMAMGC100000 or above
• Cellular Antenna (two options depending on machine)
  • High Performance Antenna
  • Low Profile Antenna
• Ethernet Cable
• Ethernet Switch (required to connect GreenStar™ 3 2630 Display to MTG in a Model Year 2014 and later machine with a Generation 4 CommandCenter™ Display)
• GS3 2630 Display

Software

The GS3 2630 Display and MTG must have compatible software versions for remote display access (RDA) to function. The latest software versions can be found on deere.com.

Subscription

Subscription is required to initiate cellular communication. Subscription types vary based on availability.

Refer to deere.com, JDLink.com terminal setup, or MyJohnDeere.com equipment list to find MTG subscription status.

Website

• To use remote display access (RDA), Microsoft Internet Explorer®, Mozilla Firefox®, Google Chrome™, or Apple Safari® are recommended. For best performance, download latest version of selected browser.
• Compatible Internet connection types: air card, Wi-Fi®, satellite, dial up, DSL, cable.
• JDLink.com and (or) MyJohnDeere.com website access.
• Access to MTG within account or third-party access.

Mobile Devices

Access RDA from any mobile device with an internet connection using one of the approved browsers as an HTML application. To ensure proper display and use, mobile operators may need to enable cookies. Some BlackBerry® devices may work correctly, but they are not supported.

Cellular Coverage

• RDA relies on 2G and (or) 3G cellular signal to initiate and maintain a connection.
• RDA is not compatible with satellite telematics connection.
• Poor cellular signal delays an RDA session from being initiated. If signal is lost or dropped during the RDA session, the session may be terminated.
• To verify cellular signal at the machine, select Menu button > GreenStar™ button > Diagnostics softkey. Select Network from the drop-down menu and go to page 2.